Intel S2600CP Technical Product Specification - Page 107

Intel® Server Board S2600CP and Server System P4000CP TPS Intel® Server Board S2600CP Connector/Header Locations and Pin-outs Table 31. Local Front Panel Connector Pin-out Pin Signal Name 1 SMB_SENSOR_3V3STBY_DATA 3 SMB_SENSOR_3V3STBY_CLK 5 FM_LCP_ENTER_N 7 FM_LCP_RIGHT_N Pin Signal Name 2 GND 4 P3V3_AUX 6 FM_LCP_LEFT_N 7.3 On Board Storage Connectors The server board provides connectors for support of several storage device options. This section provides a functional overview and pin-out of each connector. 7.3.1 SATA Connectors: 6Gbps The server board includes two white single port SATA only connectors capable of transfer rates of up to 6Gb/s. The following table provides the pin-out for both connectors. Table 32. SATA 6Gbps Connector Pin-out Pin Signal Name 1 GND 2 SATA_TX_P 3 SATA_TX_N 4 GND 5 SATA_RX_N 6 SATA_RX_P 7 GND 7.3.2 SATA Connectors: 3Gbps The server board includes four black single port SATA only connectors capable of transfer rates of up to 3Gb/s. The following table provides the pin-out for both connectors. Table 33. SATA 3Gbps Connector Pin-out Pin Signal Name 1 GND 2 SATA_TX_P 3 SATA_TX_N 4 GND 5 SATA_RX_N 6 SATA_RX_P 7 GND 7.3.3 SATA SGPIO Connector SGPIO uses a 5pin header, this is to incorporate a ground conductor as an SI improvement over previous generation products and based on measurement data indicating add the ground is strongly recommended. The 5pin connector will be consistent with other HSBPs, in this way cable commonality is improved. Revision 1.2 91 Intel order number G26942-003