Intel S2600CP Technical Product Specification - Page 132

Intel® Server System P4000CP Storage and Peripheral Drive Bays Intel® Server Board S2600CP and Server System P4000CP TPS 11.2 3.5" Hard Disk Drive Support The Intel® Server System P4308CP4MHEN and P4308CP4MHGC support 8x3.5" drive configuration. The drive bay can support either SATA or SAS hard disk drives. Mixing of drive types within the hard drive bay is not supported. Hard disk drive type is dependent on the type of host bus controller used, SATA only or SAS. Each 3.5" hard disk drive is mounted to a drive tray, allowing for hot swap extraction and insertion. Drive trays have a latching mechanism that is used to extract and insert drives from the chassis, and lock the tray in place. Figure 42. 3.5" Hard Disk Drive Cage Light pipes integrated into the drive tray assembly direct light emitted from Amber drive status and Green activity LEDs located next to each drive connector on the backplane, to the drive tray faceplate, making them visible from the front of the system. Amber Status LED Green Activity LED Table 61. 3.5" Hard Disk Drive Status LED States Amber Off Solid On Blink No access and no fault Hard Drive Fault has occurred RAID rebuild in progress (1 Hz), Identify (2 Hz) 116 Revision 1.2 Intel order number G26942-003