Intel S2600CP Technical Product Specification - Page 192

Appendix C: BMC Sensor Tables Intel® Server Board S2600CP and Server System P4000CP TPS Rearm Sensors The rearm is a request for the event status for a sensor to be rechecked and updated upon a transition between good and bad states. Rearming the sensors can be done manually or automatically. This column indicates the type supported by the sensor. The following abbreviations are used in the comment column to describe a sensor: A: Auto-rearm M: Manual rearm I: Rearm by init agent Default Hysteresis The hysteresis setting applies to all thresholds of the sensor. This column provides the count of hysteresis for the sensor, which can be 1 or 2 (positive or negative hysteresis). Criticality Criticality is a classification of the severity and nature of the condition. It also controls the behavior of the front panel status LED. Standby Some sensors operate on standby power. These sensors may be accessed and/or generate events when the main (system) power is off, but AC power is present. 176 Revision 1.2 Intel order number G26942-003