Intel S2600CP Technical Product Specification - Page 134

Intel® Server System P4000CP Storage and Peripheral Drive Bays Intel® Server Board S2600CP and Server System P4000CP TPS Label A B C D Description Reserved Power connector 4-port mini-SAS connectors I2C connector Figure 44. 2.5" Backplane, Back Side A - Reserved B - Power Harness Connector - The backplane includes a 2x2 connector supplying power to the backplane. Power is routed to the backplane by a power cable harness from the server board C - 4-port Mini-SAS Connectors - The backplane includes two or three multi-port mini-SAS cable connectors, each providing I/O signals for four SAS/SATA hard drives on the backplane. Cables can be routed from matching connectors on the server board, add-in SAS/SATA RAID cards, or optionally installed SAS expander cards. Each mini-SAS connector will include a silkscreen identifying which drives the connector supports; Drives 0-3 and Drives 4-7. D - I2C Cable Connectors - A cable connector used as a management interface to the server board. Note: The two SATA 6G connectors from ACHI (white connectors) on server board are not recommended to connect to the 8X3.5 backplane. The LED indicators on the front side of the 8X2.5" drive bay will not light up if used as such. 118 Revision 1.2 Intel order number G26942-003