Intel S2600CP Technical Product Specification - Page 109

Intel® Server Board S2600CP and Server System P4000CP TPS Intel® Server Board S2600CP Connector/Header Locations and Pin-outs 7.3.7 HSBP_I2C Header Table 38. HSBP_I2C Header Pin-out Pin Signal Name 1 SMB_HSBP_3V3STBY_DATA 2 GND 3 SMB_HSBP_3V3STBY_CLK 7.3.8 HDD LED Header The server board includes a 2-pin hard drive activity LED header used with some SAS/SATA controller add-in cards. The header has the following pin-out. Table 39. HDD LED Header Pin-out Pin Signal Name 1 LED_HDD_ACT_N Pin 2 NA Signal Name 7.3.9 Internal Type- A USB Connector The server board includes one internal Type-A USB connector. The following table provides the pin-out for this connector. Table 40. Type-A USB Connector Pin-out Pin Signal Name 1 P5V 3 USB2_P2_F_DP Pin Signal Name 2 USB2_P2_F_DN 4 GND 7.3.10 Internal eUSB SSD Header The server board includes one 10-pin internal eUSB header with an intended usage of supporting USB SSD devices. The following table provides the pin-out for this connector. Table 41. eUSB SSD Header Pin-out Pin Signal Name 1 5V 3 USB2_PCH_P12_DN 5 USB2_PCH_P12_DP 7 GND 9 Key Pin Signal Name 2 NC 4 NC 6 NC 8 NC 10 LED_HDD_ACT_ZEPHER_N 7.4 Management and Security Connectors 7.4.1 RMM4_Lite Connector A 7-pin Intel® RMM4 Lite connector is included on the server board to support the optional Intel® Remote Management Module 4. There is no support for third-party management cards on this server board. Revision 1.2 93 Intel order number G26942-003