Samsung T27B750ND User Manual Ver.1.0 (English) - Page 140
English - 140, Network Status, Network, Caption, Channel, Store Demo, Home Use, Setup, Source, System
View all Samsung T27B750ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Other Information Issues Solutions and Explanations Network Connection The wireless network connection failed. Make sure the product is connected to a wireless IP sharer (router). Software Update over the network fails. Run Network Status in Network menu to confirm the connection. If you have latest Software (SW) version, SW upgrade will not proceed. Others Purple/green rolling horizontal Remove the left and right audio connections from the Set-Top box. If the buzzing bars and buzzing noise from stops, this indicates that the Set-Top box has a grounding issue. Replace the the product speakers with a Component video cables with an HDMI connection. Component cable connection. The picture won't display in full screen. HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents. Black bars will appear on the top and bottom of the screen when you watch movies that have aspect ratios different from your product. A Mode Not Supported message appears. Caption on product menu is grayed out. Adjust the picture size options on your external device or the product to full screen. Check the supported resolution of the product, and adjust the external device's output resolution accordingly. Refer to the resolution settings of this manual. You cannot select the Caption menu if you have selected a source connected to the product via HDMI or Component. The external device's Caption function must also be activated. There is a plastic smell from This smell is normal and will dissipate over time. the product. The product Signal Information is unavailable in the Self Diagnosis menu. This function is only available for digital channels the TV receives from an Antenna / RF /Coax connection. The product is tilted to the side. Remove the base stand from the product and reassemble it. The channel menu is grayed The Channel menu is only available when you select the product source. out (unavailable). Your settings are lost after 30 minutes or every time the product is turned off. If the product is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change the settings from Store Demo mode to Home Use mode using the Setup procedure. Select TV in the Source using your remote, and go to Menu → System → Setup. You have intermittent loss of audio or video. Check the cable connections and reconnect them. Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the product to a wall, we recommend using cables with 90 degree connectors. You see small particles when This is part of the product's design and is not a defect. you look closely at the edge of the frame of the product. English - 140