Samsung T27B750ND User Manual Ver.1.0 (English) - Page 49
Memorizing Channels
View all Samsung T27B750ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Basic Features for the TV Memorizing Channels Antenna Menu → Channel → Antenna Before your product can memorize the available channels, you must select your TV's signal source, Air (using an antenna) or Cable. Select Air or Cable. After you have selected the signal source, go on to the Auto Program function. ✎✎Selecting the signal source using the Antenna function also determines the signal source the product is tuned to. For example, if you receive your TV signal over the air, and you select Cable, you will see only snow. You must select Air to see a picture. Auto Program Menu → Channel → Auto Program The Auto Program function memorizes all channels that are available over the air or through your cable system and adds them to the Channel list. To start the Auto Program, follow these steps: 1. Go to the Auto Program menu. 2. Select Air or Cable or both, and then select Next. A c mark appears in the check box. ✎✎If you selected Air or Cable in the Antenna menu, your choice will already be selected. 3. If you selected the Cable, the cable system screen appears. Select the Digital Cable System. ✎✎If you selected the Air only, the Auto Program starts. 4. Select the correct cable signal format - STD, HRC or IRC. ✎✎Most cable systems use STD (Standard). 5. Repeat for Analog Cable System. 6. Select Next. The Auto Program starts. ✎✎After all the available channels are stored, the Auto Program removes scrambled channels. When done, the Auto Program menu then reappears. This process can take up to 30 minutes. English - 49