Yamaha AW4416 Reference Guide - Page 131

SCENE screen Scene Mem page Store or recall a scene [Function] Store the current settings of the AW4416 into scene memory, or recall a scene that was stored in scene memory. 45 67 [Key operation] • [SCENE] key ¡ [F1] (Scene 1 Mem) key • Repeatedly press the [SCENE] 2 8 key until the screen shown at the right appears. 3 [Mouse operation] 9 M button ¡ SCEN button ¡ Scene Mem tab [Screen functions] A TITLE EDIT button Use this to edit the name (library title) of a scene stored in the library. When you move the cursor to the TITLE EDIT button and press the [ENTER] key, the TITLE EDIT popup window will appear, allowing you to input the name. You can input a library name of up to 16 characters. For details on inputting characters, refer to page 60 of the Operation Guide. It is not possible to change the name of scene number 0 or of a scene in which PROTECTION is turned on. Also, numbers in which no scene has been stored will be displayed as "No Data!," and their title cannot be edited. B RECALL button Recall the currently selected scene from the scene list. This is the same function as the [RECALL] key of the top panel SCENE MEMORY section. If you select a number in which nothing has been stored and attempt to recall it, an error message of "ERROR NO DATA TO RECALL" will be displayed, and recall will not be possible. C STORE button Store the current settings (current scene) of the AW4416 into scene memory. This is the same function as the [STORE] key of the SCENE MEMORY section. 124 - Reference Guide