Yamaha AW4416 Reference Guide - Page 143

Appendix Effects Parameters REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATE Hall, room, stage, and plate simulations, all with gates. Parameter Range Description REV TIME INI.DLY HI.RATIO LO.RATIO DIFF. DENSITY E/R DLY E/R BAL. HPF LPF GATE LVL ATTACK HOLD 0.3-99.0 s 0.0-500.0 ms 0.1-1.0 0.1-2.4 0-10 0-100% 0.0-100.0 ms 0-100% Thru, 21 Hz-8.0 kHz 50 Hz-16.0 kHz, Thru OFF, -60 to 0 dB 0-120 ms *1 Reverb time Initial delay before reverb begins High-frequency reverb time ratio Low-frequency reverb time ratio Reverb diffusion (left-right reverb spread) Reverb density Delay between early reflections and reverb Balance of early reflections and reverb (0% = ER, 100% = reverb) High-pass filter cutoff frequency Low-pass filter cutoff frequency Level at which gate kicks in Gate opening speed Gate open time DECAY *2 Gate closing speed MIX BAL. 0-100 [%] Mix balance of the effects and dry sounds *1. 0.02 ms-2.13 s (fs=44.1 kHz), 0.02 ms-1.96 s (fs=48 kHz) *2. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz) EARLY REF. Early reflections. Parameter TYPE ROOMSIZE LIVENESS INI.DLY DIFF. DENSITY ER NUM. FB.GAIN HI.RATIO HPF LPF MIX BAL. Range S-Hall, L-Hall, Random, Reverse, Plate, Spring 0.1-20.0 0-10 0.0-500.0 ms 0-10 0-100% 1-19 -99 to +99% 0.1-1.0 Thru, 21 Hz-8.0 kHz 50 Hz-16.0 kHz, Thru 0-100 [%] Description Type of early reflection simulation Reflection spacing Early reflections decay characteristics (0 = dead, 10 = live) Initial delay before reverb begins Reverb diffusion (left-right reverb spread) Reverb density Number of early reflections Feedback gain High-frequency feedback ratio High-pass filter cutoff frequency Low-pass filter cutoff frequency Mix balance of the effects and dry sounds Appendix-8 - Reference Guide