Yamaha AW4416 Reference Guide - Page 69

DYN/DLY screen Library page Storing and recalling dynamics processor settings [Function] Store dynamics processor settings in the library, or recall stored programs. 2 [Key operation] • [DYN] key ¡ [F2] (Library) key • Repeatedly press the [DYN] key until the screen shown at the right appears. 1 [Mouse operation] M button ¡ DYN button ¡ Library tab 5 6 7 34 K8 9 JL [Screen functions] A SEL CH This displays the currently selected recall destination channel. B Curve/type This indicates the approximate dynamics curve of the currently selected channel, and shows the name of the dynamics processor type. C GR (gain reduction) This displays the amount of gain reduction produced by the dynamics processor in dB units. D Level meter This shows the output level of the dynamics processor in dB units. E TITLE EDIT button Use this when you wish to edit the name (library title) of the dynamics program saved in the library. Move the cursor to the TITLE EDIT button and press the [ENTER] key to access the TITLE EDIT popup window where you can input the name. You can input a library name of up to 16 characters. Library numbers 1-40 are recall-only preset programs, and their name cannot be changed. Numbers in which no dynamics program has been stored are displayed as "No Data!," and their title cannot be changed. Tip! For details on the library preset dynamics programs, refer to appendix "Preset Dynamics Program Parameters". F RECALL button Recall the currently selected program from the list. If you attempt to recall a number in which nothing has been stored, an error message of "ERROR NO DATA TO RECALL" will be displayed, and the recall will not take place. 62 - Reference Guide