Yamaha AW4416 Reference Guide - Page 68
Channel, ON/OFF, GR gain reduction, Level meter, CURVE, PARAMETER, COMP compressor, EXPAND expander
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
D Channel Select the channel(s) to which the dynamics processor will apply when the 3 ST LINK ON/ OFF button is on; L (left/odd-numbered channel), R (right/even-numbered channel), or BOTH (both channels). If the ST LINK ON/OFF button is off, this will be displayed as "----" and cannot be selected. E ON/OFF This button turns the dynamics processor on/off. When the cursor is located at on/off or in the PARAMETER area, press the [ENTER] key to turn the dynamics processor on/off. F GR (gain reduction) This displays the amount of gain reduction produced by the dynamics processor in dB units. G Level meter This shows the output level of the dynamics processor in dB units. H CURVE This graph shows the approximate response of the current dynamics processor settings. I TYPE This shows the type of the currently selected dynamics processor. The following types of dynamics processor are available. q COMP (compressor) q EXPAND (expander) q GATE q COMPANDER (HARD/SOFT) q DUCKING The type cannot be changed in this page. If you wish to use a specific type, you must recall a program that uses that type from the library. For details on recalling a program, refer to P.47. J PARAMETER Set the parameters of the dynamics processor. The type of parameters and their range will differ depending on the currently selected type. For details on parameters and their functions, refer to the following appendices: "Dynamics Processors" and "Preset Dynamics Program Parameters." DYN/DLY screen 61 - Reference Guide DYN/ DLY