Yamaha AW4416 Reference Guide - Page 26
Additional functions in the Patch, Lib To store the patching settings, into a library
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
• Library number 0 is a recall-only preset; data cannot be stored in it. Data can be stored only in library numbers 1-20. • When you execute the Store operation, the patching settings that had been stored in that number will be erased. I LIBRARY No. (library number) This area displays library numbers 00-20. J LIBRARY TITLE This area displays the names assigned to the library settings. K ROM Recall-only library number 0 is indicated by a write-prohibit symbol in this column. L Selected patching The patching settings enclosed by the dotted line in the library list will be the subject of the Store or Recall operation. In this page, you can use the [DATA/JOG] dial to select patching settings regardless of where the cursor is located. s Additional functions in the Patch Lib page In the Patch Lib page you can press the [SHIFT] key to assign the following functions to the [F1]-[F4] keys. F1 F2 F3 F4 • [F1] (CHANGE TAB) key Switch between the two tab displays. • [F2] (TITLE EDIT) key Use this to edit the name (library title) of patching settings saved in the library. This is the same function as the 6 TITLE EDIT button. • [F3] (RECALL) key Recall the currently selected patching settings from the list. This is the same function as the 7 RECALL button. • [F4] (STORE) key Store the current patching settings. This is the same function as the 8 STORE button. SET UP screen q To store the patching settings into a library [Procedure] 1. Access the SET UP screen Patch Lib page. 2. Use the [DATA/JOG] dial to select the library number 1-20 into which you wish to store the settings. 3. Move the cursor to the STORE button and press the [ENTER] key. The NAME EDIT display will appear, allowing you to input the name. Tip! If STORE CONFIRMATION is turned "OFF" in the UTILITY screen Prefer.1 page ([UTILITY] key ¡ [F2] key), this popup window will not appear. 4. Input the library title. For details on inputting characters, refer to Operation Guide P.60. 5. Move the cursor to the OK button and press the [ENTER] key. The Store operation will be executed. q To recall patching settings from a library [Procedure] 1. Access the SET UP screen Patch Lib page. 2. Use the [DATA/JOG] dial to select the library number that you wish to recall. 3. Move the cursor to the RECALL button and press the [ENTER] key. A confirmation message will appear. Tip! If RECALL CONFIRMATION is turned "OFF" in the UTILITY screen Prefer.1 page ([UTILITY] key ¡ [F2] key), this popup window will not appear. 4. Move the cursor to the OK button and press the [ENTER] key. The Recall operation will be executed. 19 - Reference Guide