Yamaha AW4416 Reference Guide - Page 175
Song Top/end Out Of Range, Play Track Mute Is - word clock battery
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Appendix INT.EFF NOW SELECTED AUX. LOW BATTERY!! MAKE NEW MIX. MARK ERASED MARK SET MIDI IN: DATA FRAMING ERROR! MIDI IN: DATA OVERRUN! MIDI: RX BUFFER FULL! MIDI: TX BUFFER FULL! NO CURRENT AUTOMIX. NO DATA TO RECALL. NO MARK LEFT PLAY TRACK MUTE IS ON RECORDER BUSY RECORDER RUNNING REDO COMPLETE REPEAT POINTS TOO CLOSE SELECTED AREA HAS NO DATA. SELECTED AREA HAS NO REGION. SELECTED CH IS NONE. SELECTED CH ONLY MODE. SELECTED PAD NOT ASSIGNED. SELECTED SONG HAS NO REGION. SELECTED TRACK HAS NO REGION. SELECTED TRACK NOT RECORDED. SLOT1 INPUT SYNC ERROR! SLOT1,2 INPUT SYNC ERROR! SLOT2 INPUT SYNC ERROR! SOLO READY. SOLO SLAVE. SONG NUMBER FULL. SONG TOP/END OUT OF RANGE STEREO PAIRED. The internal effect is connected to the AUX send, and cannot be inserted. The internal battery is running down. There are no events to be edited. Please create a new mix. The mark has been erased. The mark has been set. Invalid data may have been received at the MIDI IN connector. Invalid data may have been received at the MIDI IN connector. The AW4416 is receiving more MIDI data than it can handle. The AW4416 is attempting to transmit more MIDI data than it can handle. There is no valid automix data. Please create a new mix. Since data has not been stored, it cannot be recalled. The allowable number of marks has been exceeded. Playback tracks were muted because the allowable number of simultaneously recorded/played tracks was exceeded. The operation cannot be executed because the recorder is operating. The operation cannot be executed because the recorder is recording or playing. Redo (re-execution of the previous operation) has been completed. The repeat interval is too short. It cannot be set to less than one second. The selected area contains no trigger data. The selected area contains no region. The selected channel cannot be selected since it does not exist. The channel cannot be changed, since the display mode is set to SELECTED CH ONLY. No sample is assigned to the selected sampling pad. The selected song does not contain a region. The selected track does not contain a region. The selected track does not contain recorded data. The signal being input to the input jack of a card installed in OPTION I/O slot 1 is not synchronized to the word clock master. The signal being input to the input jack of a card installed in an OPTION I/O slot is not synchronized to the word clock master. The signal being input to the input jack of a card installed in OPTION I/O slot 2 is not synchronized to the word clock master. The Solo function is ready. Use the [SEL] keys to select the solo channel. The Solo status cannot be changed when the AW4416 is functioning as a cascade slave. Press the Solo key on the master console. The maximum number of songs has been reached. You located outside the top/end range of the song. You are attempting to defeat ST LINK for the dynamics of paired channels. Appendix-40 - Reference Guide