Yamaha AW4416 Reference Guide - Page 43
Eplay Mode Ftime Gcd/dat Digital Rec Hdigital Out Copyright, After, Before - digital recorder
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
UTILITY screen E PLAY MODE Select one of the following two play modes for the Nudge function. (Default= AFTER) q AFTER Playback will be repeated for the specified nudge time 6 starting at the current location. q BEFORE Playback will be repeated for the specified nudge time 6 ending at the current location. F TIME Specify the playback length (nudge time) of the Nudge function over a range of 25-800 milliseconds. (Default= 100 milliseconds) Tip! For details on using the Nudge function, refer to Operation Guide "Chapter 6. Transport/ locate operations." G CD/DAT DIGITAL REC This setting specifies whether digital recording from an audio CD or DAT tape via a CD-RW drive or the DIGITAL STEREO IN jack will be allowed (ENABLE) or not (DISABLE). When you move the cursor to the "DISABLE" button and press the [ENTER] key, the following two-page warning will be displayed. If you select the YES button in the second page, the button display will change to ENABLE. H DIGITAL OUT COPYRIGHT This setting specifies whether SCMS (Serial Copy Management System) copy protect data will be enabled (ENABLE) or not (DISABLE) for the digital signal output from the DIGITAL STEREO OUT jack. When you move the cursor to this button and press the [ENTER] key, the setting will alternate between ENABLE/DISABLE. Even if copy protect data is enabled, it will still be possible to make a digital recording from the DIGITAL STEREO OUT jack on a DAT recorder or MD recorder. However, it will not be possible to create a second-generation digital copy. 36 - Reference Guide