Yamaha AW4416 Reference Guide - Page 18
Additional functions in the Write, CD F1] CD LOAD key, F3] NEW key, F4] INS key
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
MASTERING F Track list Here you can select the stereo tracks that will be written as audio tracks on the CD. The track list shows the following information. q TRACK This is the track number on the CD. Move the cursor to this area and rotate the [DATA/JOG] dial to change the track number. q SONG NAME/SIZE/COPY This shows the song name, stereo track data size, and copy protect setting of songs that contain a stereo track. Move the cursor to this area and use the [DATA/JOG] dial to select the stereo track that will be written to the corresponding audio track. • The track list will show only the stereo tracks of songs whose sampling frequency is 44.1 kHz. Stereo tracks of 48 kHz sampling frequency songs will not be displayed. • If a 24 bit / 44.1 kHz stereo track is selected, the lower 8 bits will be discarded when the data is written, converting it into 16 bit / 44.1 kHz data. Tip! If CD-R media containing data written using Track At Once is in the CD-RW drive, the SONG NAME/SIZE/COPY area will indicate "-EXISTING-". G Total This shows the total of the SIZE column of the track list. A maximum of approximately 650 MB can be written to 74 minute CD-R/RW media. H NEW button Add a new audio track to the track list. I INS button Insert a new audio track after the track number currently selected in the track list. J DEL Delete the currently selected audio track from the track list. K COPYRIGHT button Set the copy protect setting of the audio track currently selected in the track list. Move the cursor to this button and press the [ENTER] key to switch between the following two button displays. q PROHIBIT Digital copying of the corresponding track will be prohibited. MASTERING screen q PERMIT Digital copying of the corresponding track will be permitted. Tip! If the button is displayed as PROHIBIT, an " " symbol will be displayed in the COPY column of the track list. L EXECUTE button Use this button to execute writing (mastering) to CD-R/RW media. Tip! • The AW4416 has a "writing test" function that can check before mastering is performed to see whether data transmission errors will occur. By default, this test will not be performed. However, you can make settings so that the test will be performed before writing, or execute the test by itself. (¡ P.37) • For details on the procedure of the Mastering function, refer to Operation Guide "Chapter 17. Mastering." s Additional functions in the Write CD page In the Write CD page you can press the [SHIFT] key to assign the following functions to the [F1]-[F5] keys. F1 F2 F3 F4 F5 • [F1] (CD LOAD) key Close the tray of the CD-RW drive. • [F2] (CD UNLOAD) key Eject the tray of the CD-RW drive. • [F3] (NEW) key Add a new audio track to the track list 6. This is the same function as the NEW button 8. • [F4] (INS) key Insert a new audio track after the track number currently selected in the track list 6. This is the same function as the INS button 9. • [F5] (DEL) key Delete the audio track currently selected in the track list 6. This is the same function as the DEL button J. 11 - Reference Guide