Yamaha AW4416 Reference Guide - Page 67
DYN/DLY screen, Dyn. Edit
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
DYN/DLY screen Dyn. Edit page Dynamics processor parameter settings [Function] Set the dynamics processor parameters for the selected channel. [Key operation] • [DYN] key ¡ [F1] (Dyn. Edit) key • Repeatedly press the [DYN] key 1 until the screen shown at the right appears. [Mouse operation] 3 M button ¡ DYN button ¡ Dyn. Edit tab 4 5 2 67 8 9 J [Screen functions] A KEYIN SOURCE Select one of the following key-in signals to control the dynamics processor. q SELF (POST EQ) The post-EQ signal of the same channel q SELF (PRE EQ) The pre-EQ signal of the same channel q AUX 1 OUT The signal being output to AUX bus 1 q AUX 2 OUT The signal being output to AUX bus 2 q LEFT (POST EQ) The post-EQ signal of the next channel to the left q LEFT (PRE EQ) The pre-EQ signal of the next channel to the left LEFT (POST EQ) or LEFT (PRE EQ) cannot be selected for input channel 1, monitor channel 1, or the stereo output channel. Return channels 1/2 do not have dynamics processors. Tip! If either one of two paired channels exceeds the threshold level, both channels will operate simultaneously. B Channel If LEFT is selected as the KEYIN SOURCE (1), the key-in signal source channel will be shown here. C ST LINK ON/OFF (stereo link on/off) button If this button is on, dynamics processor parameter settings and operation will be linked for adjacent odd-numbered ¡ even-numbered channels. For the stereo out channel and for paired channels, this Stereo Link setting will always be on and cannot be defeated. When Stereo Link is turned on, the dynamics processor settings of the odd-numbered channel will be copied to the even-numbered channel. 60 - Reference Guide