Yamaha AW4416 Reference Guide - Page 44

Prefer.3 page Make overall settings for the AW4416 (3) [Function] Set the internal clock, mouse cursor speed, and removable media backup method etc. [Key operation] 1 • [UTILITY] key ¡ [F4] (Prefer.3) key • Repeatedly press the [UTILITY] key until the screen shown at the 2 right appears. 3 [Mouse operation] M button ¡ UTIL button ¡ Prefer.3 tab UTILITY screen 4 5 6 7 [Screen functions] A CLOCK Here you can set the internal clock of the AW4416. Use the [DATA/JOG] dial to adjust the year (Y), month (M), date (D), hour (h), minute (m), and second (s) fields, and use the SET button to finalize the date and time. If you use the RESET button, the date and time you input will be cancelled. Tip! • When you save a song, date and time infor- mation will be stored in the song according to this internal clock. • When shipped from the factory, the internal clock of the AW4416 is set to Japan time. • For details on setting the internal clock, refer to the opening section of the Operation Guide, "Important points you must observe." B MOUSE SPEED Use buttons 1-4 to specify the movement speed of the mouse pointer. Higher value will produce faster movement. C INT. SCSI TERMINATOR (internal SCSI terminator) This switches the internal SCSI bus terminator on/off. For details on the terminator setting, refer to Operation Guide "Before you begin." (Default: on) D BATTERY This displays the state of the battery that operates the AW4416's internal clock. If the battery capacity is sufficient, this will indicate "OK." If the battery has run low and needs to be replaced, this will indicate "LOW." If the "LOW" indication appears, please contact your dealer to have the battery replaced. E REMOVABLE BACKUP This specifies the backup method when backing up songs to removable media such as MO. Move the cursor to this button and press the [ENTER] key to switch the setting between the following two methods. (Default= TYPE 1) q TYPE 1 This backup method makes full use of the capacity of the removable media, but does not allow backup data to be added later. Even if the data being backed up will not fit on a single volume of media, the backup can extend across multiple volumes of media. If this method is selected, the media will be formatted automatically before the backup begins. 37 - Reference Guide