Yamaha AW4416 Reference Guide - Page 17
MASTERING screen, Write CD
View all Yamaha AW4416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
MASTERING screen Write CD page Using a CD-RW drive to create an audio CD [Function] Create an audio CD by writing the stereo track data of songs to CD-R/ RW media as CD audio tracks. [Key operation] 1 [MASTERING] key 6 3 [Mouse operation] 2 M button ¡ MAST button 4 7 5 8 9 KJ L [Screen functions] A DRIVE Select the SCSI ID number of the internal or external CD-RW drive. B FINALIZE button When you press this button, CD-R media that was written using Track At Once will be finalized (information on track locations etc. will be written into the data area). You must perform the finalize operation in order for CD-R media written using Track At Once to be playable on a CD player. Tip! If you used Disc At Once to write the data, finalize will be performed automatically. For this reason, the FINALIZE button will be displayed only if the TRACK AT ONCE button 3 is turned on. C TRACK AT ONCE button D DISC AT ONCE button Use these buttons to select the way in which data will be written to the CD-R/RW media (either Track At Once or Disc At Once). Before you execute the Write operation, you must move the cursor to one of these buttons and press the [ENTER] key. CD-RW media does not support Track At Once. E WRITE SPEED buttons Use the x1, x2, x4, and x6 buttons to select the writing speed (normal speed/double speed/ quad speed/x6 speed). Normally you should select the fastest speed supported by your CDRW drive. 10 - Reference Guide