Yamaha AW4416 Reference Guide - Page 85

HOME screen Omni/ST page Monitor the output levels of the OMNI OUT jacks and stereo output [Function] Monitor the output levels of OMNI OUT jacks 1-4 and the stereo output. [Key operation] • [HOME] key ¡ [F4] (Omni/ST) key 1 • Repeatedly press the [HOME] key until the screen shown at the right appears [Mouse operation] M button ¡ HOME button ¡ Omni/St tab 2 3 45 [Screen functions] A OMNI OUT level meters These meters show the output level of OMNI OUT jacks 1-4. The type of signal assigned to each OMNI OUT jack is indicated below each level meter. Tip! This page is for display only; assignments cannot be changed in this page. The signals assigned to OMNI OUT jacks 1-4 can be selected in the SETUP screen Patch OUT page. B STEREO OUT level meter This meters shows the output level of stereo output. C STEREO OUT LEVEL This shows the position of the STEREO fader in dB units. D PRE FADER (pre-fader) button E POST FADER (post-fader) button Select one of these two buttons to select the location in the signal path (pre-fader/post-fader) whose level will be shown by the STEREO OUT level meters. The PRE FADER button/POST FADER button setting will not affect the OMNI OUT level meter display. s Additional functions in the Omni/ ST page In the Omni/ST page you can press the [SHIFT] key to assign the following function to the [F1] key. F1 • [F1] (PEAK HOLD) key This key sets/defeats the Peak Hold function. This is the same function as the [PEAK HOLD] key in the level meter/counter section. 78 - Reference Guide