Dell Latitude CPi User Guide - Page 113
Confirming the System Configuration Information, Main Screen of the Dell Diagnostics
View all Dell Latitude CPi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Two lines at the top of the screen identify the diagnostics and give its version number. On the left side of the screen, the Available Test Groups area lists the diagnostic test groups in the order they will be run if you select Run and then All. Press the up- or down-arrow key to highlight a test group. On the right side of the screen, the System Configuration area lists the computer's current hardware settings. On the lower-right side of the screen, the IDE Drive Information area displays information about your hard-disk drive. The menu area is at the bottom of the screen. The first line lists the options you can select; press the left- or right-arrow key to highlight a menu option. The second line gives information about the option currently highlighted. CAUTION: While the diagnostic tests are running, do not interrupt the tests, do not unplug the AC adapter, and do not reboot the computer. Interrupting the tests in any of these ways could lead to the loss of system data. It is important to quit the diagnostics program correctly, because the program writes data to the computer's memory that can cause problems unless properly cleared. Figure 2. Main Screen of the Dell Diagnostics Confirming the System Configuration Information When you boot the computer from your diagnostics diskette, the diagnostics checks your system configuration information and displays it in the System Configuration area on the main screen. The following sources supply this configuration information for the diagnostics: