Samsung CLX-8380ND User Manual (user Manual) (ver.5.00) (English) - Page 108

open/close door, Fax memory is

Page 108 highlights

Message Meaning Suggested solutions [xxx] toner cartridge is not compatible. Check userís guide The toner cartridge you have installed is not for your machine. Install a Samsunggenuine toner cartridge, designed for your machine. [xxx] toner cartridge is not installed. Install it [xxx] toner cartridge is worn. Replace with new one The toner cartridge is not installed or the CRUM (Consumer Replaceable Unit Monitor) in the cartridge is not properly connected. The color toner cartridge has run out. The machine stops printing. Note If the black toner cartridge is empty, Mono Only message does not appear. Try to reinstall the toner cartridge. You can select the option among Stop, Continue or Mono Only . If you select Stop, the machine stops printing. If you select Continue, the machine keeps printing, but the quality cannot be guaranteed. If you select Mono Only, the machine prints the data in black. In this case, the mono printing feature is preset in the printer properties. When you copy, the Start button will be activated only with this condition. If you do not select any, the machine will work as Stop is selected. Replace the color toner cartridge with a new one. (Page 11.4) [xxx] toner is empty. Replace toner cartridge [xxx] toner is low. Order new toner cartridge DC motor does not operate: [zzz]. Please turn off then on The lifespan of the color toner cartridge which the arrow indicates is reached. The toner cartridge is almost empty. There is a problem in the control of DC motor unit. This message appears when the toner is completely empty, and your machine stops printing. Replace the toner cartridge with a Samsung-genuine toner cartridge. Ensure a replacement cartridge is in stock. Turn the machine off and turn it on again. If the problem persists, please call for service. Message Did not supply enough [xxx] toner. Remove seal tape & reinstall Did not supply enough [xxx] toner. Please open/close door Fax memory is almost full. Print or remove received fax Job Fax memory is full. Print or remove received fax Job Finisher door is open. Close it Finisher error: [zzz]. Please turn off then on Fuser error: [zzz]. Please turn off then on Fuser unit is not installed correctly. Install it LSU error: [zzz]. Please turn off then on Meaning Suggested solutions Not supplied toner to the imaging unit. • Remove the sealing tape from the imaging unit. • Thoroughly roll the toner cartridge five or six times, and reinstall it. • Turn the machine off and turn it on again. The machine received several papers with many images, and it cannot supply the toner properly. Open side door and close it. If the problem still persists, please call for service. There is no more available fax memory. No more fax data can be received. Delete the received fax data in the memory. Call for service to delete fax memory. Available fax memory is now 1MB. The finisher cover is not securely latched. There is a problem in the finisher unit. There is a problem in the fuser unit working. Delete the received fax data in the memory to secure memory. Call for service. Close the finisher until it locks into place. Turn the machine off and reinstall the finisher again. Check that the finisher cable is connected properly. If the problem persists, please call for service. Turn the machine off and turn it on again. If the problem persists, please call for service. The fuser unit is not Install the fuser unit. installed or correctly. Call for service. There is a problem in the control of LSU unit. Turn the machine off and turn it on again. If the problem persists, please call for service. 12.12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187

12
.12
<
Troubleshooting>
[xxx] toner
cartridge is not
compatible. Check
userís guide
The toner cartridge
you have installed is
not for your
machine.
Install a Samsung-
genuine toner
cartridge, designed
for your machine.
[xxx] toner
cartridge is not
installed. Install it
The toner cartridge
is not installed or the
CRUM (Consumer
Replaceable Unit
Monitor) in the
cartridge is not
properly connected.
Try to reinstall the
toner cartridge.
[xxx] toner
cartridge is worn.
Replace with new
one
The color toner
cartridge has run out.
The machine stops
printing.
Note
If the black
toner
cartridge is
empty,
Mono Only
message
does not
appear.
You can select the
option among
Stop
,
Continue
or
Mono
Only
.
If you select
Stop
, the
machine stops
printing. If you select
Continue
, the
machine keeps
printing, but the
quality cannot be
guaranteed.
If you select
Mono
Only
, the machine
prints the data in
black. In this case, the
mono printing feature
is preset in the printer
properties.
When you copy, the
Start
button will be
activated only with
this condition.
If you do not select
any, the machine will
work as
Stop
is
selected.
Replace the color
toner cartridge with a
new one.
(Page 11.4)
[xxx] toner is
empty. Replace
toner cartridge
The lifespan of the
color toner cartridge
which the arrow
indicates is reached.
This message
appears when the
toner is completely
empty, and your
machine stops
printing. Replace the
toner cartridge with a
Samsung-genuine
toner cartridge.
[xxx] toner is low.
Order new toner
cartridge
The toner cartridge is
almost empty.
Ensure a
replacement
cartridge is in stock.
DC motor does not
operate: [zzz].
Please turn off
then on
There is a problem
in the control of DC
motor unit.
Turn the machine off
and turn it on again. If
the problem persists,
please call for
service.
Message
Meaning
Suggested solutions
Did not supply
enough [xxx]
toner.
Remove
seal tape &
reinstall
Not supplied toner to
the imaging unit.
Remove the
sealing tape from
the imaging unit
.
Thoroughly roll the
toner cartridge five
or six times, and
reinstall it.
Turn the machine
off and turn it on
again.
Did not supply
enough [xxx]
toner. Please
open/close door
The machine
received several
papers with many
images, and it
cannot supply the
toner properly.
Open side door and
close it. If the
problem still persists,
please call for
service.
Fax memory is
almost full. Print
or remove
received fax Job
There is no more
available fax
memory. No more
fax data can be
received.
Delete the received
fax data in the
memory. Call for
service to delete fax
memory.
Fax memory is full.
Print or remove
received fax Job
Available fax
memory is now
1MB.
Delete the received
fax data in the
memory to secure
memory. Call for
service.
Finisher door is
open. Close it
The finisher cover is
not securely latched.
Close the finisher
until it
locks into
place.
Finisher error:
[zzz]. Please turn
off then on
There is a problem
in the finisher unit.
Turn the machine off
and reinstall the
finisher again. Check
that the finisher cable
is connected
properly. If the
problem persists,
please call for
service.
Fuser error: [zzz].
Please turn off
then on
There is a problem
in the fuser unit
working.
Turn the machine off
and turn it on again. If
the problem persists,
please call for
service.
Fuser unit is not
installed correctly.
Install it
The fuser unit is not
installed or correctly.
Install the fuser unit.
Call for service.
LSU error: [zzz].
Please turn off
then on
There is a problem
in the control of LSU
unit.
Turn the machine off
and turn it on again. If
the problem persists,
please call for
service.
Message
Meaning
Suggested solutions