Samsung CLX-8380ND User Manual (user Manual) (ver.5.00) (English) - Page 50
Booklet copying, Cover copying, Transparency copying, Erasing edges, Book Center and Edge Erase
View all Samsung CLX-8380ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Note To remove shadows of a book edge, press the Image tab > Erase Edge > Book Center and Edge Erase. 4 Select the binding option. • Off: Disables this feature. • Left Page: Prints left page of the book. • Right Page: Prints right page of the book. • Both Page: Prints both facing pages of the book. 5 Press OK. 6 Press Start on the control panel to begin copying. Booklet copying The machine automatically prints on one or both sides of the paper, which are then folded to produce a booklet with all of the pages in the correct sequence. The machine will also reduce and correctly adjust the position of each image to fit on the selected paper. 1 Place the originals face up in the DADF. Or place a single original face down on the scanner glass. (Page 4.1) 2 Press Copy from the Main screen. 3 Select the tray in Paper Supply. 4 Press the Advanced tab > Booklet. 5 Press On to activate this feature, and select detailed settings for each option. • 1 Sided Original: Copys on one side of the paper. • 2 Sided Original: Copys on both sides of the paper. 6 Press OK. 7 Press Start on the control panel to begin copying. Note This feature is possible only with A4, Letter, Legal, Folio, Oficio, JIS B5, ISO B5, Executive, A5 and Statement sized paper. Cover copying The machine automatically adds covers to your copied set using stock taken from a different tray. Covers must be the same size and orientation as the main body of the job. 1 Place the originals face up in the DADF. Or place a single original face down on the scanner glass. (Page 4.1) 2 Press Copy from the Main screen. 3 Select the tray in Paper Supply. 4 Press the Advanced tab > Covers. Note Once you have set the Paper Supply option to Auto, you cannot use this feature. 5 Press On to use this feature, and select detailed settings for each option. • Position: Selects whether the cover will be placed at the front, back, or both. • Cover Sheet: Selects whether the cover will be 1 sided, 2 sided, or blank paper. • Paper Source: Select the paper tray, where the cover sheet is loaded. 6 Press OK. 7 Press Start on the control panel to begin copying. Transparency copying When you prepare transparencies for presentations, use this feature to copy the information. Note Before you start this special copy job, set the tray's Paper Types and Paper Size to Transparency.(Page 4.9) 1 Place the originals face up in the DADF. Or place a single original face down on the scanner glass. (Page 4.1) 2 Load the right-sized transparencies into the tray you have set. 3 Set the paper type to Transparency. 4 Press Copy from the Main screen. 5 Press the Advanced tab > Transparencies. 6 Select Transparencies option. • No Separator: Does not place separator sheets between transparencies. • Blank Sheet: Places a blank sheet between transparencies. • Printed Sheet: Places the same image on the divider sheets as printed on the transparency. 7 Select media sources, in case you selected either Blank Sheet or Printed Sheet. 8 Press OK. 9 Press Start on the control panel to begin copying. Erasing edges 5.7