Samsung CLX-8380ND User Manual (user Manual) (ver.5.00) (English) - Page 85
Optional Service, SyncThru™ Web Admin - cost per page
View all Samsung CLX-8380ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Option Description Authentication Network Mode Accounting It enables the authentication mode which is set from the Job Account menu in the SyncThru™ Web Admin Service. Foreign Device Interface When you install the optional FDI kit, select On to activate it. • Job Timer: If there is not enough credit, you can set the machine to cancel a job right away or wait a designated amount of time for a deposit. • Print Job Control: When it is enabled, the both computer printing and copying are possible since the credit remains. With Disable, copy printing needs the credit. However, when printing a report or a fax, the credit is not needed. • Inhibit Services: When no credit is left, the machine disables the copy job only with Copy Only. With All Service, scanning service and copy job are disabled. • Internal Credits: It is used when you cancel the job or when the job is cancelled by the device due to insufficient credits (coin) or is canceled by user's request. If you select Enable, the machine deposits a credit equal to the number of sheets that did not print out correctly, then it prints next job for free (for the amount deposited). With Disable, even if you cancel the printing job, the machine includes jammed paper in the count and the cost of printing shall be recovered for the pages already billed. • Image Counter: Depends on whether the machine counts blank white pages. Authentication No Mode Authentication (Continue) Mode It disables Authentication Mode. Option Change Admin. Password Description You can change the password for the Admin Setting authentication. Optional Service When you want to add the optional features for this machine, you have to install the optional kit and then set the machine to enable and activate those features. Follow the next steps to enable those features. 1 Press Machine Setup on the control panel. 2 Press Admin Setting. When the login message pops up, then enter password and press OK. 3 Press the Setup tab > Optional Service. Option Description Copy Enables or disables the Copy menu from the main screen. Analog Fax After installing the fax kit, select this option Enable to use this machine as a fax machine. Scan to Email Enables or disables the Scan to Email menu from the scan screen. NetScan Set Enable to activate the scanning and sending it via network. Scan to SMB Enables or disables the Scan to SMB option from the scan screen. Scan to FTP Enables or disables the Scan to FTP option from the scan screen. On Demand Image Overwrite You can set the machine to delete previous job information on HDD as you store new job information. Set this option to Enable, go to the General tab > On Demand Overwrite, press Start in the display to start the overwriting job. Immediate Image If you select Enable, the machine renews the Overwrite HDD memory when you save new job on it. 10.7