Samsung CLX-8380ND User Manual (user Manual) (ver.5.00) (English) - Page 80
Browsing the machine’s status, General settings, Held Job Timeout
View all Samsung CLX-8380ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Browsing the machine's status You can browse the machine information and validate some features of the machine. 1 Press Machine Setup on the control panel. 2 Press Machine Status > the Machine Info. tab. 3 Press the General tab. Option Machine Details Print/Report Tray Status Usage Counters Description This option shows the customer support information on the email address and the phone number you stored from Admin Setting. Also, you can check the machine's serial number, or the hardware and software information specification. You can print various helpful and informative reports such as System Report, Fax Report and Scan Report. (Page 11.1) The screen shows the trays installed on your machine, and their current configurations. Select the tray and Edit to change the settings for paper type and size. You can view the amount of each category that your machine has printed so far. To print this report, see page 10.9. General settings Before you get ready to using the machine, it is recommended to set up the machine parameters. 1 Press Machine Setup on the control panel. 2 Press Admin Setting. When the login message pops up, then enter password and press OK. (Factory setting is 1111.) Option Device Info Date & Time Default Settings Measurements Timers Language Description The sub-options available are Service Center Registration and Contact Info. You may enter information on service center and purchasing point. You can set the date and time. (Page 3.5) • Default Window: Set the first window that will appear on the display screen after turning on the machine or waking up from the Power Save. For example, if you select Fax as a default window, the first window will be the Basic tab of the Fax feature. In case you want to show ID Copy as a default window, you need to enable this feature in Default Option previously. • Default Option: Changes all the default values for copying, faxing, emailing, scanning and paper at once. (Page page 3.6) • Home: Allows user to arrange each function in the display screen. Note: Depending on the optional kit you installed or the category you selected, the selectable options on the display screen may differ. This option lets you change the measurement unit to use (mm or inch), and set the numeric separation (comma or period). The machine cancels a printing job if data does not be received in specific time. • System Timeout: The machine returns to the default value after certain time the machine waits. You can set a time for maximum 10 minutes. • Held Job Timeout: The machine holds a job for a specific time period. You can set a time period for at least an hour. It allows you to change the language that appears on the touch screen. 10.2