HP Color LaserJet CM2320 Service Manual - Page 277
Error, Turn off then on, black developer motor rotation
View all HP Color LaserJet CM2320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 277 highlights
Table 7-12 Control-panel messages (continued) Control panel message Event log error message 59.70 Error 59.7000 Turn off then on 59.73 Error Turn off then on 59.7300 59.80 Error Turn off then on 59.8000 59.83 Error Turn off then on 59.8300 59.9 Error Turn off then on 59.9000 Description Recommended action The product has experienced a black developer motor startup error. 1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. Turn on the power and wait for the product to initialize. If the error persists, replace the developer motor. If the error persists, replace the DC controller. The product has experienced a 1. Turn off the power by using yellow-magenta-cyan developer the power switch, and then motor startup error. wait at least 30 seconds. 2. Turn on the power and wait for the product to initialize. If the error persists, replace the developer motor. If the error persists, replace the DC controller. The product has experienced a black developer motor rotation error. 1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. Turn on the power and wait for the product to initialize. If the error persists, replace the developer motor. If the error persists, replace the DC controller. The product has experienced a 1. Turn off the power by using yellow-magenta-cyan developer the power switch, and then motor rotation error. wait at least 30 seconds. 2. Turn on the power and wait for the product to initialize. If the error persists, replace the developer motor. If the error persists, replace the DC controller. The product has experienced an 1. ITB motor startup error. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. Turn on the power and wait for the product to initialize. If the error persists, replace the ITB. If the error persists, replace the drum motor. ENWW Control-panel messages 265