HP Color LaserJet CM2320 Service Manual - Page 278
A0 Error, Turn off then on, Error, internal firmware error. Under
View all HP Color LaserJet CM2320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 278 highlights
Table 7-12 Control-panel messages (continued) Control panel message Event log error message 59.A0 Error Turn off then on 59.0160 59.C0 Error Turn off then on 59.0192 59.F0 Error Turn off then on 59.0240 79 Error Turn off then on Description Recommended action If the error persists, replace the DC controller. The product has experienced an 1. ITB motor or main motor rotation error. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. Turn on the power and wait for the product to initialize. If the error persists, replace the ITB. If the error persists, replace the drum motor. If the error persists, replace the DC controller. The product has experienced a developer motor error. 1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. Turn on the power and wait for the product to initialize. If the error persists, replace the developer motor. If the error persists, replace the DC controller. The product has experienced a transfer alienation error. 1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. Turn on the power and wait for the product to initialize. If the error persists, verify that the DC controller connectors are firmly connected. If the error persists after a printcartridge replacement, examine the cartridge, and then replace it if necessary. If the error persists, replace the DC controller. If the error persists, replace the cartridge tray. The product has experienced an internal firmware error. Under most conditions, the product will power cycle automatically. Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If the error persists, perform an NVRAM initialization. If the error persists, update the firmware. 266 Chapter 7 Problem solve ENWW