HP Color LaserJet CM2320 Service Manual - Page 41
Table 2-7, Network configuration menu, Service menu continued
View all HP Color LaserJet CM2320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Table 2-6 Service menu (continued) Menu item Sub-menu item Sub-menu item 1 minute USB speed Less paper curl Off 1 minute 15 minutes 30 minutes 1 hour 2 hours 4 hours High Full On Off Archive print On Off Restore defaults Description on printed output. The cleaning process removes dust and excess toner from the paper path. When selected, the product prompts you to load plain Letter or A4 paper in Tray 1. Press OK to begin the cleaning process. Wait until the process completes. Discard the page that prints. Specify the amount of idle time before the product enters sleep mode. Sets the USB speed. When printed pages are consistently curled, this option sets the product to a mode that reduces curl. The default setting is Off. When printing pages that will be stored for a long time, this option sets the product to a mode that reduces toner smearing and dusting. The default setting is Off. Sets all customized settings to the factory default values. Table 2-7 Network configuration menu Menu item Sub-menu item TCP/IP configuration Automatic Manual Description Automatic automatically configures all the TCP/IP settings via DHCP, BootP or AutoIP. Manual requires you to manually configure the IP address, subnet mask, and default gateway. The control panel prompts you to specify values for each address section. Use the arrow buttons to increase or decrease the value. Press OK to accept the value and move the cursor to the next field. ENWW Control-panel menus 29