Kyocera FS-9100DN FS-9100/9500 Operation Guide Rev-1.3 - Page 103
Hard Disk, 2.5 Memory Card, For details of available memory cards, see your dealer.
UPC - 632983001066
View all Kyocera FS-9100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Appendix D Option Units 2.4 Hard Disk Insert the hard disk into its slot on the main circuit board of the printer. If a hard disk unit is installed in the printer, received data can be rasterized and stored on this hard disk. This enables high-speed printing of multiple copies using an electric sort function. Also, you can use the e-MPS functions. For details, see eMPS on page 3-11. For details of available hard disks, see your dealer. 1 Turn off the printer and disconnect the power cord and printer cable. 2 Remove the two screws and remove the slot cover (OPT1/HDD). 2.5 Memory Card Insert the memory card into the memory card slot located the right side of the printer. A memory card is a microchip card that may contain option fonts, macros, forms, etc. The printer reads the contents of the card into its internal memory when printer is turned on. For details of available memory cards, see your dealer. 1 Turn off the printer. NOTE Do not insert or remove a memory card while the power is on. If the memory card is removed while the printer is on, damage could result in the printer's electronics or the memory card. 2 Insert the memory card in the slot. Insert it with its label surface facing toward the outside, connector end first. Push it in all the way. 3 Insert the optional hard disk unit into the slot. 4 Tighten the two screws to secure the hard disk unit to the main circuit board. D-4