Kyocera KM-C3232E Fax System (N) Operation Guide Rev-1.2 - Page 104

Other Features of this Fax Automatically Switching Between the Fax and a Telephone (Auto FAX/TEL Switching) This reception mode is convenient for using a separately purchased telephone together with this fax on a single telephone line. If an incoming call is from a fax machine, fax reception will start automatically. If the call is from a telephone, the fax will ring to let you know that you should answer. NOTE: Auto FAX/TEL Switching is only possible if a separately purchased telephone is connected to this fax machine. Even if you do not answer the telephone, the calling party will incur telephone charges after the phone rings a predetermined number of times. Reception flow Preparation Refer to Selecting the Automatic Reception Mode (Receive Mode setting) on page 7-12, and select Auto Fax/Tel. SW. for fax transmission. riginal & assign destination. Make sure that Auto RX is displayed on the basic fax screen. If it is not, press the reception mode select key and then press the [Auto RX] key. Abbrev. Application TX setting Register Print Report 1 When a call comes in, the telephone will ring. However, if '0' is selected for Auto Fax/Tel SW under the Number of Rings setting, the ringing will not be audible. NOTE: The telephone will ring only once in the metric version models. In the inch version models, you can set the number of times the telephone will ring. (Refer to Setting the Number of Rings [Auto Fax Reception] (Number of Rings setting) on page 7-6.) 2 Answering the call... Memory usage: .0% OCT-11-2005 16:00 Dest. check Re-dial On-hook Memory TX Auto RX 5-2