Kyocera KM-C3232E Fax System (N) Operation Guide Rev-1.2 - Page 91

Fax Operation (Various Functions) Initiating the Fax Connection Manually (Manual Fax Reception) Once you are connected with the other party, reception can be initiated manually by pressing the Start key. Use this mode when you want to talk to the other party prior to actual reception of the documents. NOTE: Conversation with the other party is only possible if a separately purchased telephone is connected to this fax machine. Auto Fax Reception is the default setting in this fax, so, in order to manually initiate reception, it is usually necessary to change the reception mode to Manual Fax Reception. Preparation Make sure that [Manual RX] is displayed. If it is not, press the reception mode select key and then press the [Manual RX] key. for fax transmission. riginal & assign destination. Abbrev. Application TX setting Register 1 When a call comes in, the separately purchased phone will ring. Print Report Memory usage: .0% OCT-11-2005 16:00 Dest. check Re-dial On-hook Memory TX Manual RX 2 Pick up the telephone receiver. 3 Check whether or not the call is from a fax. > If you hear a fax tone... You are connected to a fax machine. Press the Start key. Fax reception will begin. NOTE: If the separately purchased telephone has tone dialing capabilities, you can use the Remote Switching function. (Refer to Initiating Fax Reception From A Connected Telephone (Remote Switching) on page 5-8.) 3-25