Kyocera KM-C3232E Fax System (N) Operation Guide Rev-1.2 - Page 165
Modifying or Deleting Encryption Boxes, Reset, > Deleting an Encryption Box
View all Kyocera KM-C3232E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Other Features of this Fax 9 To use the NW-FAX Reception function, press the [On] key. If you don't use the NW-FAX Reception function, press the [Off] key and go to the next step. 10 Press the [Confirm] key. The message display will return to the same screen as was displayed in step 4. If you want to continue registering other Encryption Boxes, repeat steps 4 through 10. Once you are finished registering Encryption Boxes, press the Reset key. Modifying or Deleting Encryption Boxes NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Perform steps 1 through 3 of Registering New Encryption Boxes on page 5-61. 2 Press the key which displays the box number for the Encryption Box you want to modify or delete. Register box Encryption box 0352. 9876. 3 Enter the Box ID (4-digits) for that Encryption Box. Register box Encryption box 02. Box ID confirmation Back Enter box id using # key. _. ( 4 digits) 4 Press the [Confirm] key. 5 If you want to delete the registered Encryption Box, press the [Delete] key Register box Encryption box 02. and then go to the next step. If you want Contents change/del. Back to modify the registered information, press the [Change contents] key and then go directly to step 7. Box. No. 0352. Box. ID 0352. Change contents Delete > Deleting an Encryption Box 6 Press the [Yes] key. The message display will return to the same screen as was displayed in step 2. Once you are finished modifying and/or deleting Encryption Boxes, press the Reset key. > Modifying registered information 7 The currently registered information will be displayed. Refer to Registering New Encryption Boxes on page 5-61 in order to modify that information. 8 Press the [Confirm] key. The message display will return to the same screen as was displayed in step 2. Once you are finished modifying and/or deleting Encryption Boxes, press the Reset key. 5-63