Kyocera KM-C3232E Fax System (N) Operation Guide Rev-1.2 - Page 47

Fax Operation (Basic Use) > Stopping the reception in progress 1 Press the [Status] ([Act status]) key for fax transmission. in the bottom right of the touch riginal & assign destination. panel. 2 Press the [Stop] key and the reception will be canceled. Abbrev. Application TX setting Register Print Report Check Status of Fax Status of Fax Port Receive Service center No. of0p3a. ges 001. Stop Memory usage: .0% OCT-11-2005 16:00 Dest. check Re-dial On-hook Memory TX Status Auto RX Memory OCT-11 Print Memory Reception When you cannot print out because paper has run out or a paper jam occurs, the data for all received documents will be temporarily stored in memory and will then be printed out automatically once printing is enabled. When a fax has been received into memory, the Fax lamp will light and Receive document in memory will appear in the message display. To print out the documents, set paper or fix the paper jam, as appropriate to the situation. IMPORTANT: If, for any reason, power to the fax is disconnected or lost, data received into memory may be lost. Ask the other party to retransmit any documents for which data was lost. 2 Printing out the received documents Received document(s) will be printed out and ejected face-down in the copy store section. 2-11