Kyocera KM-C3232E Fax System (N) Operation Guide Rev-1.2 - Page 184
Turning Print Out of Each Report ON/OFF (Print Report setting), Activity Report, Transmission Report
View all Kyocera KM-C3232E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Various Settings and Registration Turning Print Out of Each Report ON/OFF (Print Report setting) Six different reports can be printed out for checking such points as whether a transmission or reception was accomplished correctly or not. You can also have each of these reports printed out automatically or turn OFF automatic print out of each report. Activity Report Set this report to be printed out upon reaching a predetermined number of communications in order to check the details of those communications. Transmission Report Set this report to be printed out after each transmission to check whether the transmission was accomplished correctly or not. NOTE: Select [Output on condition] and then, it is possible to set this report to be printed out only under certain condition such as a communication error and a Broadcast Transmission. Reception Report Set this report to be printed out after each reception to check whether the reception was accomplished correctly or not. NOTE: Select [Output on condition] and then, it is possible to set this report to be printed out only under certain condition such as a communication error, a Polling Reception, an Encryption Reception and an F-Code Based Confidential Reception. Delayed Communication Report Set this report to be printed out after each communication that uses the timer is scheduled to check the information related to that communication. Restricted Access Report Set this report to be printed out whenever Restricted Access is turned ON in order to check the details, listed by department, of all communications occurring under Restricted Access. NW-FAX Transmission Report You can have this report attached to an e-mail message in order to check whether each Network FAX transmission was accomplished correctly or not. NOTE: Select [Output on condition] and then, it is possible to set this report to be printed out only under certain condition such as a communication error and a Broadcast Transmission. NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 7-2