Kyocera KM-C3232E Fax System (N) Operation Guide Rev-1.2 - Page 203

Various Settings and Registration Registering the Remote Test ID (Remote Test ID setting) If you have entered into a contract with an authorized service center for their Remote Diagnosis service, it is necessary to register here in advance the Remote Test ID that they designate for you. NOTE: A previously registered Remote Test ID can also be modified by performing the following procedure. If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Press the [Register] key. The Register screen will appear. Ready for fax transmission. Place the original & assign destination. Dest Memory OCT-11 2 Press the [Remote Test ID] key. 3 Use the numeric keys to enter the designated 4-digit Remote Test ID. NOTE: If you want to revise the entered number, press the [] or [] cursor key to move the cursor to the number that you want to change. Address book Basic Abbrev. Application TX setting Register Print Report Registering item option screen. Select item for register. Dial Location Info. Date & Time Box TX/RX Restrict. Fax Forwarding Remote SW dial Remote Test ID Encryption key Network FAX Basic Application Register Print Report Enter Remote ID. Remote Test ID Back Enter using # key. 0000. ( 4 digits) 4 Press the [Confirm] key. The message display will return to the same screen as was displayed in step 2. If you are finished making settings, press the Reset key to return to the initial mode. 7-21