Kyocera KM-C3232E Fax System (N) Operation Guide Rev-1.2 - Page 56
Making More Detailed Settings, To use this key for Encrypted Transmission
View all Kyocera KM-C3232E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Fax Operation (Basic Use) Making More Detailed Settings 9 If you want to perform more detailed settings like selecting the transmission speed, or designating this one-touch key for F-Code Based Communication or Encrypted Transmission, press the [Setting] key and then go to the next step. 10 Select the desired transmission speed from among those available: 33600bps, 14400bps and 9600bps. Register date & time. One-Touch Key 0001. Date/Time TX Start Speed Back (Either subadd TX. nor encryption trans. can register) 33600bps 14400bps 9600bps Subaddress TX Encryption TX 11 If you want to designate this key for F-Code Based Communication, press the [Subaddress Tx] key and then go to the next step. If you want to designate this key for Encrypted Transmission, go directly to step 15. If you want to register this one-touch key with the entered information as is, press the [Close] key and proceed directly to step 20. 12 To use this key for F-Code Based Communication, press the [On] key. The Subaddress/Password Input screen will appear. 13 Use the numeric keys to enter the desired subaddress and F-Code password. (Maximum 20 digits) Register the dial. One-Touch Key0001. Subaddress TX Enter using # key. Subaddress _. Off Password On Back (MAX. 20 dig (MAX. 20 dig Delete NOTE: To switch between the subaddress and password input screens, press the [Password] key. A subaddress is required during F-Code Based Communication in order to designate the other party's corresponding F-Code Box. An F-Code password is used during F-Code Based Communication. However, you do not have to enter an F-Code password here if you have determined in advance with the other party not to use one. 14 Press the [Close] key twice and then go directly to step 20. 15 If you want to designate this key for Encrypted Transmission, press the [Encryption TX] ([Encryption]) key. 16 To use this key for Encrypted Transmission, press the [On] key. The Key Code/Box Number Input screen will appear. 2-20