Kyocera KM-C3232E Fax System (N) Operation Guide Rev-1.2 - Page 147

4 Press the [Program] key. Register the dial. Dial type O3n3e6-0to0ubcphs key Group Program Chain Other Features of this Fax Back 5 If you do NOT want to designate a time of day for the operation to begin, press the [Off] key under Delayed TX and go directly to step 7. Register the dial. Program Dial(Send) 0006. Delayed TX/TX type Delayed TX Enter using # key. Off Start Time 08:00. On Off Back TX type Send RX Polling 6 Use the numeric keys to enter the desired time of day for the operation to begin. NOTE: If you want to change the entered time, use the [] and/or [] keys to move the cursor to the desired location. 7 Press the [Send] key or the [RX Polling] key to choose the type of transmission. 8 Press the [Next] key. 9 Enter the destination fax number. Register the dial. Program Dial(Send) 0006. Enter Destination. Dest .1 ABC ABC GDE Delete Pause Space Subadd. FREE Address book Abbrev. Next destinat. NOTE: You can enter the fax number using the numeric keys, abbreviated numbers, one-touch keys or the address book. Chain dial keys can be used as well. If you want to enter multiple fax numbers with the numeric keys, press the [Next destinat.] ([Next dest.]) key after each fax number. 10 Press the [Finish dest. Set] ([Dest. set]) key. 11 Enter a name for the program and the [Next] key. (Maximum 20 characters) NOTE: In order to enter characters, refer to Entering Characters on page 2-15.) 12 Check the currently registered information and press the key that corresponds to any item that you want to modify. 13 Press the [OK] key. The message display will return to the same screen as was displayed in step 3. 5-45