Kyocera KM-C3232E Fax System (N) Operation Guide Rev-1.2 - Page 110

Other Features of this Fax Initiating Fax Reception From A Connected Telephone (Remote Switching) Remote Switching lets you initiate fax reception from a telephone that is connected to this fax machine. This function is thus convenient if you want to be able to initiate fax reception from a location separate from the fax machine itself. NOTE: Remote Switching is only possible if a separately purchased telephone with tone dialing capabilities is connected to this fax machine. Even if the phone you use has tone dialing capabilities, depending upon the model of the phone, this function may not work as expected. For further information, contact your service representative, an authorized service center or the place or purchase. Changing the Remote Switching Number The factory default setting for the Remote Switching Number is 55, but you can change this if you want. NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Press the [Register] key. The Register screen will appear. Ready for fax transmission. Place the original & assign destination. Dest Memory OCT-11 Address book Basic Abbrev. Application TX setting Register Print Report 2 Press the [Remote SW dial] key. Remote Switching registration is now possible. Registering item option screen. Select item for register. Dial Location Info. Date & Time Box TX/RX Restrict. Fax Forwarding Remote SW dial Remote Test ID Encryption key Network FAX Basic Application Register Print Report 3 Use the numeric keys to enter the new Remote Switching Number (2 digits). Register remote switch dial. Remote Switch Back Enter using # key. 55. ( 2 digits) NOTE: If you want to change the entered number, use the [] and/or [] keys to move the cursor to the desired location. If you want to reset the displayed number to 00, simply press the Stop/Clear key. 4 Press the [Confirm] key. Registration of the new Remote Reception Number is complete. 5 If you are finished making settings, press the Reset key. 5-8