Kyocera KM-C3232E Fax System (N) Operation Guide Rev-1.2 - Page 200

Various Settings and Registration Turning Duplex Reception ON/OFF (Duplex RX setting) The Duplex Unit turns paper over inside the fax machine so that printing can be accomplished on the back side of the paper as well (Duplex Reception function). When the width of each page received is exactly the same, the documents will be printed onto the front and back sides of that size of paper. NOTE: To use the Duplex Reception function, it is necessary to turn it ON in advance. When the Duplex Reception function is turned ON, all pages of a fax reception will be temporarily stored in memory - regardless of the reception mode setting - and they will then be printed out at one time. 2 in 1 Reception will not be available when both 2 in 1 Reception and Duplex Reception are turned ON. If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Press the System Menu/Counter key. The System Menu / Counter screen will appear. 2 Press the [Fax Default] key. System Menu / Counter System Menu Copy Default Scanner Default Machine Default FAX Default Printer Default Document Management Language MP tray Setting Register Orig. Size 3 Use the [T] cursor key until Duplex RX (2-sided RX) is highlighted. 4 Press the [Change #] key. 5 Select whether you want to turn Duplex Reception ON or OFF by pressing either the [ON] or [OFF] key, as appropriate. System Menu / Counter Duplex RX On Off Job Accounting BOX Management Print Report Back 6 Press the [Close] key. If you are finished making settings, press the Reset key to return to the initial mode. 7-18