Kyocera KM-C3232E Fax System (N) Operation Guide Rev-1.2 - Page 134

Other Features of this Fax NOTE: You can also enter the fax number using one-touch keys that have been designated for F-Code Based Communication as well. If you do use such a one-touch key, press the Start key and the transmission operation will begin automatically. 3 Press the [Subadd.] key. 4 Press the [On] key. 5 Use the numeric keys to enter the appropriate subaddress. for fax transmission. key to transmit 1234_. Delete Pause Space Subadd. Memory usage: .0% OCT-11-2005 16:00 Next des Dest. check Re-dial Delayed TX Duplex TX Application 8½×11" Orig. size setting Register Normal Orig image quality Print Report Regular Exposure mode On-hook Memory TX Auto RX Ready for fax transmission. Subaddress TX Enter using # key. Subaddress _. Off Password On Memory OCT-11 Back (MAX. 20 dig (MAX. 20 dig Delete NOTE: This subaddress is required during an F-Code Based Communication in order to designate the box in the destination party's fax. It can be up to 20 digits in length and can include any combination of the numerals 0 - 9 and the symbols * and #. You can use the [] and/or [] keys to move the cursor to a desired location, and you can clear the entered number by pressing the [Delete] key. 6 Press the [Password] key. 7 If necessary, use the numeric keys to enter the predetermined F-Code password. NOTE: The password can be up to 20 digits in length and can include any combination of the numerals 0 - 9 and the symbols * and #. This password is not required if you agree in advance with the destination party not to use one. 8 Press the [Close] key. The message display will return to the same screen as was displayed in step 2. You can now change any transmission settings that you want or set the time for the transmission to begin. 9 Press the Start key. The transmission operation will begin. 5-32