Kyocera KM-C3232E Fax System (N) Operation Guide Rev-1.2 - Page 217

18 Use the numeric keys to enter the currently registered administrator number. Enter password Admin. Number Check Enter the administrator number. Network FAX Settings Back NOTE: The factory default administrator number is either 2500 (25/25 ppm model), 3200 (32/25 ppm and 32/32 ppm models) or 4000 (40/35 ppm model). For more detailed information on the administrator number, refer to the Advanced Operation Guide for your machine. The Administrator Number input screen will not be displayed if Restricted Access is turned ON. 19 Enter the password using the English alphabet, numerals or other available symbols. (Maximum 31 digits) NOTE: Refer to Entering Characters on page 2-15 when entering the password. 20 Once you are finished entering the password, press the [End] key. The message display will return to the same screen as was displayed in step 11. 21 Press the [Close] key. The message display will return to the same screen as was displayed in step 3. > Registering the save folder number (factory default setting: RX001 and TX001) 22 Press the [Saving Folder No.] ([No.of save folder]) key. Register Network FAX. Regist'd contents cnf File name IP addr./ Host name Admin. E-mail ad. Receive: rx Transmit: tx Saving Folder No. Receive Transm 23 Use the numeric keys to enter the save folder number in which documents which have been received using the Network FAX functions will be saved. Enter save number. (001-100) Subaddress/password Save Number(with #key) NetworkFAX Rx. 001. Save Tx. original 001. Clear NOTE: [Clear] key: Press this key when you want to reenter the number. [Stop] key: Press this key when you want to cancel the registration procedure and return the touch panel to the screen in step 3. 24 Press the [Save Tx. original] key and use the numeric keys to enter the save folder number for transmitted documents in the same manner as you did for received documents. 9-11