Kyocera KM-C3232E Fax System (N) Operation Guide Rev-1.2 - Page 156

Other Features of this Fax 2 Press the key which displays the Permit ID you want to modify or delete. Register in TX/RX Restriction list. Permit List #01 0101. #02 0202. #03 #04 #05 5555. 3 If you want to delete the registered Permit ID, press the [Delete] key and Register in TX/RX Restriction list. Permit ID No. 1. then go to the next step. If you want to Contents change/del. Back modify the registered information, press the [Change contents] key and then go 0101. directly to step 5. Change contents Delete > Deleting a Permit ID 4 Press the [Yes] key. The message display will return to the same screen as was displayed in step 2. If you are finished deleting Permit IDs, press the Reset key. > Modifying information 5 Press the Stop/Clear key to delete the old number and then enter the new Register in TX/RX Restriction list. Permit ID No. 1. Permit ID, or use the [] and/or [] keys Detail contents Back to move the cursor to a desired location Enter using # key. and reenter the number as desired. 0101. ( 4 digits) 6 Press the [Confirm] key. The message display will return to the same screen as was displayed in step 2. Once you are finished modifying and/or deleting Permit IDs, press the Reset key. Registering New Reject Fax Numbers NOTE: You can register up to 5 numbers as Reject Fax Numbers in this fax. If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Press the [Register] key. The Register screen will appear. Ready for fax transmission. Place the original & assign destination. Dest Memory OCT-11 Address book Basic Abbrev. Application TX setting Register Print Report 5-54