Kyocera KM-C3232E Fax System (N) Operation Guide Rev-1.2 - Page 154

Other Features of this Fax Modifying or Deleting Permit Fax Numbers NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Perform steps 1 through 3 of Registering New Permit Fax Numbers on page 5-50. 2 Press the key which displays the Permit Fax Number you want to modify or delete. Register in TX/RX Restriction list. Permit FAX No. #01 12345678. #02 #03 #04 0612345. #05 5555. 3 If you want to delete the registered Permit Fax Number, press the [Delete] Register in TX/RX Restriction list. Permit FAX No. 1. key and then go to the next step. If you Contents change/del. Back want to modify the registered information, press the [Change contents] 12345678. key and then go directly to step 5. Change contents Delete > Deleting a Permit Fax Number 4 Press the [Yes] key. The message display will return to the same screen as was displayed in step 2. If you are finished deleting Permit Fax Numbers, press the Reset key. > Modifying information 5 Press the Stop/Clear key to delete the old number and then enter the new Permit Fax Number, or use the [] and/or [] keys to move the cursor to a desired location and reenter the number as desired. Pressing the [Delete] key will delete the number directly above the cursor. Register in TX/RX Restriction list. Permit FAX No. 1. Detail contents Enter using # key. (MAX. 20 digits) 12345678_. Back Delete 6 Press the [OK] key. The message display will return to the same screen as was displayed in step 2. Once you are finished modifying and/or deleting Permit Fax Numbers, press the Reset key. Registering New Permit IDs NOTE: You can register up to 5 numbers as Permit IDs in this fax. If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 5-52