Kyocera KM-C3232E Fax System (N) Operation Guide Rev-1.2 - Page 155
Modifying or Deleting Permit IDs, Press the [Permit ID No.] key.
View all Kyocera KM-C3232E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
1 Press the [Register] key. The Register screen will appear. Other Features of this Fax Ready for fax transmission. Place the original & assign destination. Dest Memory OCT-11 2 Press the [TX/RX Restrict.] key. 3 Press the [Permit ID No.] key. Address book Basic Abbrev. Application TX setting Register Print Report Registering item option screen. Select item for register. Dial Location Info. Date & Time Box TX/RX Restrict. Fax Forwarding Remote SW dial Remote Test ID Encryption key Network FAX Basic Application Register Print Report Register in TX/RX Restriction list. Item option Permit FAX No. Permit ID No. Reject FAX No. 4 Press an unregistered key. The information will be displayed for all keys that have already been registered. Register in TX/RX Restriction list. Permit List #01 0101. #02 0202. #03 #04 #05 5555. 5 Use the numeric keys to enter the desired 4-digit Permit ID. If you want to change the entered number, use the [] and/or [] keys to move the cursor to the desired location. 6 Press the [Confirm] key. The message display will return to the same screen as was displayed in step 4. If you want to continue registering other Permit IDs, repeat steps 4 through 6. If you are finished registering Permit IDs, press the Reset key. Modifying or Deleting Permit IDs NOTE: If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Perform steps 1 through 3 of Registering New Permit IDs on page 5-52. 5-53