Kyocera KM-C3232E Fax System (N) Operation Guide Rev-1.2 - Page 163
Registering New Encryption Boxes, > Deleting an Encryption Key, Reset, > Modifying information
View all Kyocera KM-C3232E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Other Features of this Fax > Deleting an Encryption Key 4 Press the [Yes] key. The message display will return to the same screen as was displayed in step 2. If you are finished deleting Encryption Keys, press the Reset key. > Modifying information 5 Press the Stop/Clear key to delete the key is registered. old key and then enter the new key 01. Encryption Key, or use the [] and/or Back [] keys to move the cursor to a desired right key. location and reenter the Encryption Key as desired. 1234567890ABCDEF. (16digits) OK 6 Press the [OK] key. The message display will return to the same screen as was displayed in step 2. Once you are finished modifying and/or deleting Encryption Keys, press the Reset key. Registering New Encryption Boxes An Encryption Box must be registered in your fax machine in order to receive an Encryption Communication. During that registration procedure, you will also need to select whether or not you want the received documents to be printed out immediately or not. NOTE: You can register up to 15 Encryption Boxes in this fax machine. If, for any reason, you lose reference to an Encryption Box number, you will not be able to modify information for the corresponding box nor will you be able to delete that box. Therefore, you exercise DUE CAUTION in the management of the Encryption Box numbers. If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. IMPORTANT: The box number that you enter during the registration of any Encryption Box CANNOT be the same number as the subaddress of a registered F-Code Confidential Box or F-Code Relay Box. If you want to have received documents automatically printed out from the Encryption Box immediately after reception, select [On] in step 8. If you want to have received documents stored in the Encryption Box and allow print out only when the appropriate procedure is performed, select [Off]. In this case, since the only person who can print out the received documents is the individual who knows the corresponding Encryption Box number and that box's ID, confidentiality is maintained. 1 Press the [Register] key. The Register screen will appear. Ready for fax transmission. Place the original & assign destination. Dest Memory OCT-11 Address book Basic Abbrev. Application TX setting Register Print Report 5-61