Kyocera KM-C3232E Fax System (N) Operation Guide Rev-1.2 - Page 130
Modifying or Deleting F-Code Relay Boxes
View all Kyocera KM-C3232E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Other Features of this Fax 2 If you entered the fax number with the numeric keys, press the [Next destinat.] ([Next dest.]) key. 9 Press the [Finish dest. Set] ([Dest. set]) key. 10 Select whether or not you want the received documents to be printed out at Register box Subaddress relay box02. your fax (press the [On] key to have Local print/return Back them printed and the [Off] key to stop Print Here Return report print out), and whether or not you want send a Transmission Report regarding the results of the final transmissions to On On the initial transmitting station (press the Off Off [On] key to send a report and the [Off] key to not send a report.). 11 Press the [Next] key. If you selected to send a Transmission Report to the initial transmitting station, go to the next step. If you selected NOT to send a report, proceed directly to step 14. 12 Enter the fax number of the initial transmitting station. NOTE: You can use the numeric keys, one-touch keys and Chain dial keys to enter the fax number. 13 Press the [Finish dest. Set] ([Dest. set]) key. 14 Check the registered information. Each item can be modified. 15 Press the [OK] key. The message display will return to the same screen as was displayed in step 4. If you want to continue registering other F-Code Relay Boxes, repeat steps 4 through 15. Once you are finished registering F-Code Relay Boxes, press the Reset key. Modifying or Deleting F-Code Relay Boxes Perform the following procedure when you want to add or delete final destinations or change other information registered under any F-Code Relay Box, as well as when you want to completely delete one of those boxes. NOTE: In order to modify the contents of or completely delete an F-Code Relay Box, it is necessary to enter the corresponding F-Code password during the procedure. If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Perform steps 1 through 3 of Registering New F-Code Relay Boxes on page 5-26. 2 Press the key which displays the subaddress for the F-Code Relay Box you want to modify or delete. Register box Subaddress relay box 3333. 0715. 8888. 5-28