Sanyo VCC-HD5400 VCC-HD5400 Manual - Page 10
Connection to 24 VAC power supply, Connection to 12 VDC power supply
UPC - 086483075698
View all Sanyo VCC-HD5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Connect the power terminals (24 VAC/12 VDC) of the camera to a power supply. 1 Connection to 24 VAC power supply Although the power terminals have no polarity, the earth grounding wire must be connected to the GND (earth grounding) terminal. 2 Connection to 12 VDC power supply Note the polarity (+/-) of the power terminals when connecting the camera to a 12 VDC power supply. Incorrect polarity may cause damage to the camera. Be sure to use an 18AWG or thicker wire power cable. If you must use a long power cable, determine the cable type by ensuring that the voltage at the 24VAC/12-VDC terminal is within the operating range of the camera. If you are using PoE, do not use the camera's power terminals (24 VAC/12 VDC). This camera is designed so that you can use all of its functions via network operation. Introduction 10/15