Sanyo VCC-HD5400 VCC-HD5400 Manual - Page 52
Under [ACCESS NAME JPEG], type an access name for each JPEG stream and click, Under [ACCESS NAME H.
UPC - 086483075698
View all Sanyo VCC-HD5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
The RTSP port number must be 554 or otherwise a number in the range of 1 to 65535. The RTP port (video and audio) numbers must be even numbers in the range of 1026 to 65534 (except for numbers between 3874 and 5000, between 9874 and 10000, between 38087 and 38214, and between 49026 and 49152). If you intend to access the camera from video viewer or similar software, you may name each stream (access name) as you like for easy identification. 1 Under [ACCESS NAME (JPEG)], type an access name for each JPEG stream and click SET . These settings are used for each stream for which you set the codec to "JPEG" on the VIDEO & AUDIO SETTINGS screen. An access name must be specified for each stream (up to 32 alphanumeric characters). 2 Under [ACCESS NAME (H.264)], type an access name for each H.264 stream and click SET . These settings are used for each stream for which you set the codec to "H.264" on the VIDEO & AUDIO SETTINGS screen. An access name must be specified for each stream (up to 32 alphanumeric characters). To enable multicast streaming, configure the multicast address, port numbers, and TTL settings for each stream and click SET . Working with Administrator Configuration Screens 6/79