Sanyo VCC-HD5400 VCC-HD5400 Manual - Page 27

The operation privileges of users who perform network operation are divided into 5 levels (admin, operator1, operator2, guest, and download). Each user who attempts to access the camera will be authenticated by the user name and password at login and granted an appropriate operation privilege. Operation admin Operation Privileges operator1 operator2 guest download Monitor live video. ○ ○ ○ ○ ○ Hearing sounds from camera ○ ○ ○ ○ ○ Sending audio messages to camera ○ ○ ○ - - Changing your own password ○ △ △ △ △ Selecting a live video stream ○ △ △ △ △ VIDEO & AUDIO SETTINGS ○ ○ - - - Configuring settings ○ □ - - - PTZ controller ○ ○ ○ - - Remote Alarm Buttons ○ ○ ○ - - Emergency recording button ○ ○ ○ - - Downloading data recorded on camera to PC - - - - ○ ○ : Available □: Available (Excluding NETWORK SETTINGS) -: Unavailable △: Available only if permitted by a user with the admin privilege (hereinafter referred to as "admin user") on the USER REGISTRATION screen "download" is the operation privilege required for using the supplied downloader application (HDC Downloader). Disabling authentication check at login You may set [ANONYMOUS USER LOG IN] to "ON" on the USER REGISTRATION screen to allow anyone to access the camera without any authentication check at login. In this case, all login users are regarded as guest users. This means that users will be presented with an authentication check dialog box if they attempt to perform any operation beyond the guest user privilege and must enter an adequate user name and password to proceed. The camera provides one factory-set default user per operation privilege. Besides these users, you can register up to 20 custom users as client users. Default users (5 users) When you access the camera for the first time, login as an admin user and perform the necessary configurations. Before You Begin Network Operation 12/13