Sanyo VCC-HD5400 VCC-HD5400 Manual - Page 69

In [IRIS], select MANUAL.

Get Sanyo VCC-HD5400 - Full HD 1080p Day/Night Pan-Tilt-Zoom Camera PDF manuals and user guides
UPC - 086483075698
View all Sanyo VCC-HD5400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

Enabling the electronic sensitivity boosting function causes the following: The exposure time of the camera's image sensing device will be increased automatically in dark situations. This may result in conspicuous afterimages, blurs, and white spots if the subject includes any moving object. If [DAY/NIGHT] is set to "AUTO", the electronic sensitivity boosting function will work only for black/white video images. The electronic iris (EI) setting will be cancelled. [SHUTTER] is set to "OFF", preventing you from configuring the electronic shutter setting ("SHORT" or "LONG"). You cannot configure [MOTION]. 3 In [LEVEL], select the video signal level and click SET . 0 (dark) to 100 (bright) The electronic iris (EI) function cannot be used in conjunction with the auto iris function. If you have decided to use the electronic iris, configure the lens iris manually using the following procedure. 1 In [IRIS], select "MANUAL". 2 In [EI], enable or disable the electronic iris. Adjusts the exposure, controlling both the AGC circuit and the shutter speed. OFF: Disables the electronic iris. ON: Enables the electronic iris. Enabling the electronic iris (EI) function causes the following: The electronic shutter setting (SHORT/LONG) will be cancelled and the electronic sensitivity boosting will not work. Under an extremely intense light source, the amount of light entering the lens cannot be adjusted. In this case, configure the auto iris. Under fluorescent lighting, the camera may cause the target image to flicker. To prevent this, replace the fluorescent lamps with incandescent lamps. 3 In [IRIS STOP], select the value to adjust the lens iris. The lens iris opens or closes based on the iris stop setting. 1 (closes the iris = dark) to 17 (opens the iris = bright) 4 In [LEVEL], select the video signal level and click SET . 0 (dark) to 100 (bright) Working with Administrator Configuration Screens 23/79

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
Enabling the electronic sensitivity boosting function causes the following
:
The exposure time of the camera's image sensing device will be increased automatically in dark
situations. This may result in conspicuous afterimages, blurs, and white spots if the subject
includes any moving object.
If [DAY/NIGHT] is set to “AUTO”, the electronic sensitivity boosting function will work only for
black/white video images.
The electronic iris (EI) setting will be cancelled.
[SHUTTER] is set to “OFF”, preventing you from configuring the electronic shutter setting
(“SHORT” or “LONG”).
You cannot configure [MOTION].
3
In [LEVEL], select the video signal level and click
SET
.
0 (dark) to 100 (bright)
The electronic iris (EI) function cannot be used in conjunction with the auto iris function.
If you have decided to use the electronic iris, configure the lens iris manually using the following procedure.
1
In [IRIS], select “MANUAL”.
2
In [EI], enable or disable the electronic iris.
Adjusts the exposure, controlling both the AGC circuit and the shutter speed.
OFF: Disables the electronic iris.
ON: Enables the electronic iris.
Enabling the electronic iris (EI) function causes the following:
The electronic shutter setting (SHORT/LONG) will be cancelled and the electronic sensitivity
boosting will not work.
Under an extremely intense light source, the amount of light entering the lens cannot be adjusted.
In this case, configure the auto iris.
Under fluorescent lighting, the camera may cause the target image to flicker. To prevent this,
replace the fluorescent lamps with incandescent lamps.
3
In [IRIS STOP], select the value to adjust the lens iris.
The lens iris opens or closes based on the iris stop setting.
1 (closes the iris = dark) to 17 (opens the iris = bright)
4
In [LEVEL], select the video signal level and click
SET
.
0 (dark) to 100 (bright)
Working with Administrator Configuration Screens 23/79