Sanyo VCC-HD5400 VCC-HD5400 Manual - Page 76
In [SHUTTER], select SHORT., In [SHUTTER SPEED], select the desired shutter speed and click, In [ - vcc hd5400p manual
UPC - 086483075698
View all Sanyo VCC-HD5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
1 In [SHUTTER], select "SHORT". 2 In [SHUTTER SPEED], select the desired shutter speed and click SET . VCC-HD5400P: 25, 50, 120, 250, 500, 1000, 2000, 4000, 10000 VCC-HD5400: 30, 60, 100, 250, 500, 1000, 2000, 4000, 10000 Each of the above shutter speed values represents the denominator "n" of the fraction 1/n. For example, selecting "500" means to set a shutter speed of 1/500 second. The long exposure shutter mode has a longer exposure time than the field storage time. The long exposure shutter mode increases the sensitivity of the camera to make the subject brighter. You cannot configure the long exposure shutter mode (LONG), if the electronic sensitivity boosting (SENSE UP) or the electronic iris (EI) is enabled. You cannot configure the long exposure shutter mode (LONG), if [MOTION] is enabled. 1 In [SHUTTER], select "LONG". 2 In [SHUTTER SPEED], select the desired shutter speed and click SET . x1, x2, x4, x8, x16, x32 Each of the above shutter speed values represents a multiple of the field storage time. The higher the value, the longer the exposure time. Setting an excessively long exposure time may result in ghosts, blurs and white spots if the subject includes any moving object. Configure the video signal gain value automatically or manually. Automatically configuring gain value using AGC Manually configuring gain value Auto Gain Control (AGC) is a function that automatically adjusts the gain value of the camera's video signal amplifying circuit according to the brightness of the subject to maintain a constant signal output. The configured settings are applied only to the camera views that were specified in [VIEW]. Working with Administrator Configuration Screens 30/79